Show Begins: 7:00 p.m.
Chairman: Ben Watkins (270) 492-8112
- All single cylinder tractors must be powered at 4000 RPM or be equipped with steel flywheel and shielded 360 degrees with 1/8 inch steel plate or equivalent. RPM's will be checked.
- All tractors will be equipped with an anti-roll over device (wheelie bars) extending at least 5 inches past furthest point of rear tires.
- A working kill switch is required on all modified tractors.
- A helmet is required and fire jacket is suggested on all modified.
- Hitch height (13 inches) will be checked in all classes on scales as you are being weighed. Be prepared to make adjustments is necessary.
Twin cylinder tractors will run, but classes will be determined at pull.
Classes
Entry fees will be $15.00 in all classes with 2/3 payback and $200 added money (Note: There will be a class made for any 3 tractors if they do not qualify for these.) One driver admitted free per pulling tractor.
Class Weight
8-10 HP Stock 850 lbs
12 Stock 1000 lbs
12 Stock Altered 1000 lbs
(includes any 12 w/ open RPM’s or modified)
16 Stock 1050 lbs
(includes any stock twins)
16 Stock Altered 1050 lbs
(includes any 16 with open RPM’s)
40 CI 1050 lbs
(includes 16 SS, twin stock with open RPM’s)
48 CI 1050 lbs
Pro Stock (50.5) 1050 lbs
750 CC 1250 lbs
Big Motor/Small Tire 1300 lbs
Light Outlaw 1350 lbs
Heavy Outlaw 1400 lbs
Updated for 2010 Fair